Menu


Thimeo Stereo Tool 10.21 / 10.20 / 10.11 / 10.10

January 22, 2024 - Software
Thimeo Stereo Tool 10.21 / 10.20 / 10.11 / 10.10

Stereo tool is a software-based audio processor which offers outstanding audio quality and comes with many unique features. It is used by over 1500 FM stations ranging from small local stations to 50-100 kW stations and nation-wide networks with dozens of transmitters, thousands of streaming stations and many DAB+, HD, AM and TV stations. It can be used for both live and file based processing.

If you don’t use Stereo Tool for FM processing, Basic suffices.

FM Standard offers “standard” FM processing, stereo and RDS encoding. The processing in this license is comparable to what many high end (00+) hardware boxes offer. In most markets, this license will make you one of the louder stations on the dial.

FM Professional adds our special Composite Clipper to the processing. This is the same clipper that’s in the Omnia.9sg and the Omnia.9 and Omnia.7 are being upgraded to it. The Composite Clipper takes the stereo pilot, stereo encoding and RDS into account when generating the composite MPX signal, which increases the headroom for audio by a lot. You can typically generate a signal that’s 2-3 dB louder without sounding more clipped, which results in a much more dynamic and much higher fidelity signal. Beside that it unlocks our “Asymmetric L-R” mode, which adds another 1 dB or so. Beside these advantages to the audio signal, the clipper can also analyse the RF spectrum after the exciter, and optimize the signal to reduce reception issues in fringe areas and in multipath areas.

If you can use Stereo Tool to generate the composite MPX signal, we highly recommend the FM Professional version, which sounds much better and improves your reception. To be clear, with FM Standard you’re not doing worse than most high end hardware boxes, but FM Professional really takes it to another level – assuming proper hardware you’ll be the loudest and cleanest station on the dial.

Declipper

Due to the so-called loudness war, where everyone wants their track to sound louder than any other track, nearly all music from the last 20 years or so has been clipped during mastering. This causes several issues:

To make things worse, audio processing tends to boost softer sounds, in this case, the distortion, which worsens these problems. The Declipper repairs the audio before it enters the processor.

Our declipper is also used by police forensics labs. The following video shows what it does to clipped audio:

Delossifier

The Delossifier improves the sound of lossy compressed audio. It’s targeted at repairing low bitrate MP3 and MPEG2 files. Use this if your playlist contains low bitrate tracks. (But please, do everyone a favor and replace them…. With clipped audio that’s usually not possible, but low bitrate is a different story.

Advanced Dynamics

Advanced Dynamics was added in Stereo Tool version 8.50. It consists of 2 parts:

Auto EQ is the most spectacular part. It adjusts the sound before the AGC without compressing it. This makes it possible to have a much more consistent output without sounding processed. Since it doesn’t compress the audio, it doesn’t add density and doesn’t cause pumping or breating. Auto EQ can achieve the same spectral consistency that multiband compression can, without those side effects. It does not affect audio levels, only the spectrum.

Dynamic Ratios makes it possible to have a different ratio in the compressors depending on how much they are pushing the level down. When it gets deeper, it gets steeper. So a very loud sound will be compressed more.

This video shows the Auto EQ in action:

v10.21
Bug fix: Wrong (nonexistent) language selection could cause crashes.
Bug fix: Console version was reading from wrong settings file by default (~/stereo_tool instead of ~/.stereo_tool.rc on Linux/Mac).
Bug fix: Omnia.SST licensing was broken in recent versions, possibly other products as well.
Bug fix: Omnia.SST misbehaved, always tried to apply SSB mode even if that was disabled.
Bug fix: Command line version could output a message to stdout, which could interfere with streaming input to output in programs like LiquidSoap.
Bug fix: Generic plugin: Closing the GUI didn’t work properly since version 10.00, causing problems with mAirList (and possibly other hosts).
Bug fix: Generic plugin: API broke due to missing function exports in 10.00. Built-in preset functions are no longer supported, now return false.
Generic plugin: Removed Full Screen/Height modes.
Optimized scanning of built-in presets, mainly to speed up startup.
Optimized scanning of saved presets, mainly to speed up startup.
Cleaned up GUI code, made it a bit faster and use a bit less memory.
MicroMPX: Bug fix: Since version 4.2.1 (ST 10.11), decoder could have dropouts every 6h12m46s for certain settings. Was fixed in 4.2.2, but 1 edge case remained.
MicroMPX: Bug fix: Seting a password, then turning password protection off crashed.

More Info

 

Special thanks to CallumCat (TSRh) keygen release and Blackrider (TSRh) Internet check patch release.

2 September 2023 – Added new VST (big thanks to Blackrider TSRh)

19 October 2023 – Thanks to Blackrider gift release 🙂

20 October 2023 – Added latest DSP and VST64 (Detected as false positive)

23 October 2023 – Added VST x86 version (Detected as false positive)

14 November 2023 – Added Stereo tool x64 version (Detected as false positive)

9 January 2024- Added 10.20 /VST x86 version (big thanks to Blackrider TSRh)

9 January 2024 – Added VST x64 + DSP + Stereo tool x64 (big thanks to Blackrider TSRh)

22 January 2024 – Updated 10.21 version (big thanks to Blackrider TSRh)

 

Stereo tool x86 10.21 (May detected as false positive)

(Registered Silent Install Repack) x86

Download

 

Stereo tool x64 10.21 (May detected as false positive)

(Registered Silent Install Repack) x86

Download

 

VST & DSP plugin (Salute to Blackrider TSRh) 10.21

Download

 

Stereo tool x86 10.20 (May detected as false positive)

(Registered Silent Install Repack) x86

Download

 

Stereo tool x64 10.20 (May detected as false positive)

(Registered Silent Install Repack) x86

Download

 

VST & DSP plugin (Salute to Blackrider TSRh) 10.20

Download

 

Stereo tool x86 10.11 (May detected as false positive)

(Registered Silent Install Repack) x86

Download

 

Stereo tool x64 10.11 (May detected as false positive)

(Registered Silent Install Repack) x86

Download

 

VST & DSP plugin (Salute to Blackrider TSRh) 10.11

Download

 

Stereo tool x86 10.10

(Registered Silent Install Repack) x86

Download

 

Stereo tool x64 10.10 (added 7 Feb 2024)

(Registered Silent Install Repack) x64

Download

 

Stereo Tool Enterprise 10.10

(Registered Silent Install Repack) x64

Download

 

VST & DSP plugin (Salute to Blackrider TSRh) 10.10

Download

20 thoughts on “Thimeo Stereo Tool 10.21 / 10.20 / 10.11 / 10.10

angelloferreira

Thanks!

    muammer akdas

    Teşekkürler elinize sağlık

Bambang Gunari

Link is Broken

slauf

Dear cybermania team: The most recent version you put on the page when unpacked: DSP.dll file from 7 Z, then here you can see that they are not complete files like in previous versions. Because of this, dsp and vst do not see radio boss and winamp. Here in dll files missing files when unpacked from 7Z. In your older versions, when you unpack the files from VST.dll or DSP.dll in 7 z, you see a file named data, which is the main file for plugins. If you have the possibility to correct this, it would be good because the main files are simply missing in the .dll files.

slauf

Data when you unpack VST and DSP files in stereo tool. Try to unpack in 7z these files from version 9.70 or 9.92 and you will see that the files integrated in the .dll file are there. However, try unpacking this in version 10.0 and dsp and VST and you will see that the files fail. For example, in version 9.92 we have the names of the following files in vst_stereo_tool.dll and open with 7 z as archive files are as follows: .rsrc
.data
.data1
.debug_o
.gfids
.giats
.rdata
.reloc
.text
.text1
.tls

.trace
_RDATA
IPPCODE
These are the files from the Dll file opened with 7z and these files fail in stereo version 10.0 because when I try to open them it reports an error 7z which means they are not set properly because these files fail. In the original version of stereo tool 10.0, these files are there when opened with 7z. I hope you understand what I’m talking about.

    cyberloner

    it was compress dll from the cracker Blackrider and it is his own right to not sharing out the code changes he make. it was under gound war on crack world. take it or leave it

      soraj43689

      Hi, thanks for the stereo tool, but stomped in vst_stereo_tool_64.dll files are not detectable. Crownsoft Audio Repeater Pro 1.6.0 reports an error.

        soraj43689

        Thimeo Stereo Tool 9.92 is right, VST files are detectable

        Dinesh

        you can download the working vst files from the manufacturer´s website.
        however, it´s possible that you have to enter a (keygenerated) valid licence code each time you want to use the plugin.

ninemin

Thank you very much for providing this version of Stereo Tool. I wanted to report that after a couple of hours of use, an audio effect is emitted on the processed signal. The version I’m using is Stereo Tool x86 (Registered Silent Install Repack) x86.

tim strug

Please guys we need also MicroMPX Encoder/Decoder lastest version.

whit3mag3

Has anyone been able to get the VSTs working from ANY of the releases?

10.11 / 10.10, or 9.92, or 9.70 / 9.63 / 9.50 posts?

    Dinesh

    yes, i am currently running 10.11 under audition via .vst

      whit3mag3

      When I activate the VST and try to use the Declipper portion, it just acts as if the plugin isn’t on and doesn’t do anything. How did you get yours to work?

shutupanddrive789

I’m looking for a cracked Stereo_Tool_Generic_plugin, libStereoTool or stereo_tool linux.
doesn’t matter which version, i hope anyone can make the newest cracked.

peterbuist1998

Nice thanks

Is there Anyone who cracked the Orban pcn1600 software

jeff31

Virus: Trojan included in x86 & x64 application 10.21

    cyberloner

    false positve … don’t judge by av

jeff31

I try to find Mac license registration key

Leave a Reply