Menu


Thimeo Stereo Tool 9.83

December 5, 2021 - Software
Thimeo Stereo Tool 9.83

Stereo tool is a software-based audio processor which offers outstanding audio quality and comes with many unique features. It is used by over 1500 FM stations ranging from small local stations to 50-100 kW stations and nation-wide networks with dozens of transmitters, thousands of streaming stations and many DAB+, HD, AM and TV stations. It can be used for both live and file based processing.

If you don’t use Stereo Tool for FM processing, Basic suffices.

FM Standard offers “standard” FM processing, stereo and RDS encoding. The processing in this license is comparable to what many high end (00+) hardware boxes offer. In most markets, this license will make you one of the louder stations on the dial.

FM Professional adds our special Composite Clipper to the processing. This is the same clipper that’s in the Omnia.9sg and the Omnia.9 and Omnia.7 are being upgraded to it. The Composite Clipper takes the stereo pilot, stereo encoding and RDS into account when generating the composite MPX signal, which increases the headroom for audio by a lot. You can typically generate a signal that’s 2-3 dB louder without sounding more clipped, which results in a much more dynamic and much higher fidelity signal. Beside that it unlocks our “Asymmetric L-R” mode, which adds another 1 dB or so. Beside these advantages to the audio signal, the clipper can also analyse the RF spectrum after the exciter, and optimize the signal to reduce reception issues in fringe areas and in multipath areas.

If you can use Stereo Tool to generate the composite MPX signal, we highly recommend the FM Professional version, which sounds much better and improves your reception. To be clear, with FM Standard you’re not doing worse than most high end hardware boxes, but FM Professional really takes it to another level – assuming proper hardware you’ll be the loudest and cleanest station on the dial.

Declipper

Due to the so-called loudness war, where everyone wants their track to sound louder than any other track, nearly all music from the last 20 years or so has been clipped during mastering. This causes several issues:

To make things worse, audio processing tends to boost softer sounds, in this case, the distortion, which worsens these problems. The Declipper repairs the audio before it enters the processor.

Our declipper is also used by police forensics labs. The following video shows what it does to clipped audio:

Delossifier

The Delossifier improves the sound of lossy compressed audio. It’s targeted at repairing low bitrate MP3 and MPEG2 files. Use this if your playlist contains low bitrate tracks. (But please, do everyone a favor and replace them…. With clipped audio that’s usually not possible, but low bitrate is a different story.

Advanced Dynamics

Advanced Dynamics was added in Stereo Tool version 8.50. It consists of 2 parts:

Auto EQ is the most spectacular part. It adjusts the sound before the AGC without compressing it. This makes it possible to have a much more consistent output without sounding processed. Since it doesn’t compress the audio, it doesn’t add density and doesn’t cause pumping or breating. Auto EQ can achieve the same spectral consistency that multiband compression can, without those side effects. It does not affect audio levels, only the spectrum.

Dynamic Ratios makes it possible to have a different ratio in the compressors depending on how much they are pushing the level down. When it gets deeper, it gets steeper. So a very loud sound will be compressed more.

This video shows the Auto EQ in action:

 

2021/10/31 v9.83

Bug fix: MicroMPX encoder built into Stereo Tool could cause pilot phase to move incorrectly for certain Quality/Number of CPU threads combinations since 9.80.
Rasbperry Pi version: Added MicroMPX encoding to the ARM versions of Stereo Tool. MicroMPX V.4 encoding uses little CPU power, making it usable on a Pi 4.

 

More Info

 

Special Repack from CRUDE keygen and crack…. Salute the CRUDE

 

Remark: FULMOON is not releasing any new updated crack… 9.70 is leave online as well in case fail with 9.83 version. Share me which is the best preset too…

 

4 December 2021 – Added vst3

5 December 2021 – Update all installer. If program fail please comment.

 

(Cracked Silent Install Repack) x86

Download

 

(Cracked Silent Install Repack) x64

Download

 

Stereo Tool Kantar 9.83 (May nag bad license but green light is on)

(Cracked Silent Install Repack) x86

Download

 

VST & DSP 9.83 (Cracked) password = CyberMania

Download

 

CRD keygen crack release

password = CyberMania

Download

21 thoughts on “Thimeo Stereo Tool 9.83

hank dussen

Thank you very much To me it’s the best audio upgrade tool there is.

    cyberloner

    yea best dsp to play song…

jimdats

NOT WORCK THE FM COMPOSITE CLIPPER

      Discovery

      It is a key error, the keygen is producing a valid serial for all functions! Less to activate the composite clipper function in fm mode.
      Test yourself, selecting a factory preset for Fm, then you will note the display of a message informing that the licensee does not recommend activating the composite clipper in (Processing => advanced Clipper => composite clipper)
      “FM Composite Clipper Used without License”

      I hope someone in the crd group can fix the problem!

hank dussen

Unfortunately, I get a commercial message of the makers after 24 hours of installation. The 9.70 version by TSRh doesn’t have that. Did you per change the licence name?

    cyberloner

    which one? x64? this release is not perfect anyway. FULMOON is not releasing any new one.. this release base on CRD release crack

      hank dussen

      Hi Cyberloner, Currently, I use ThimeoStereoTool9.0x86.exe 11.061.767 bytes downloaded on May 2nd 2021
      This one has the license name TSRh. Btw Don’t worry be happy, this truly is a wonderful site! 🙂

        cyberloner

        TSRh version is older version should have no nag… latest 9.83 is CRD crack but no idea it working well or not… DSP is good.

OsiriS_DJ

Key is not permanent in VST x64 bits (vst_stereo_tool_64.dll).
I have to enter it every time I open and close the program.
Works, but you have to enter it every time you use the program.

Screenshot: https://i.imgur.com/nvX8n8q.png

    cyberloner

    it was not perfectly crack sir.. use 9.70 version for work

      slauf

      Greeting. This version of the Stereo Tool VST X64 9.80 has quite a better sound to the Preset than the previous version, so it would be good if you get a stable and better serial number or DLL file that is already registered. I hope it will solve you for a while.
      greetings from Sarajevo
      Edin.

OsiriS_DJ

Now I understand that the executable called DSPLicence is for DSP only (it works properly). No VSTLicence came in the file.

    cyberloner

    i never use vst and no idea how to use it sir. else i can try out. DSP is use in my winamp and it is working well for listening

      OsiriS_DJ

      Thank you very much cyberloner, I have already found a solution for VST2 x32 and x64. 🙂

        slauf

        OsiriS_DJ
        How did you solve this with the HJP2 X64? On version 9.83 I only have a problem in the VST 64 A VST 32 works properly

      slauf

      As you know the VST plugins is used by file.dll copies to the desired software from which you want to listen to the stereo tool. In order to configure it in the software. I have a WIN 10 64 bit system and the Radio Boss recently appeared with 64 bit support that supports only VST add-ons that are 64 so I use a stereo tool 64 bit version. I expect you to version 9.80 HV 64 supplement update to work properly.
      Greeting
      Edin.

slauf

Greeting. These days I tested your crack stereo tool in the system. As I earlier wrote I have a 64 bit system. I’m completely blind person and use the screen reader. I use the radio boss and use it to create a play list and listening to music for myself. On Paltalk I have friends and there from Radio Boss, I release music. As you have known radio BOSS supports VST and DSP plugins. 70 percent is compatible with screen readers I use Jaws and NVDA. I am using a stereo tool plugin because it is the only VST plugin that can be adjusted with our screen readers by configuring the VST Stereo Tool to include web interface. When the web interface is enable, compactive options are optioned with Scren Reader. Unfortunately, the Radio Boss configuration can not be adjusted to any VST plugins with the Scren Reader.
Stereo Tool 9.83 works with a serial number you sent here to the page but only 32 VST work properly as long as 64 HV has a problem when re-launching it is always a serial number. They will be resolved with 64 bit versions do not know.
Greeting
Edin.

kandanganclub

please sir dsp Thimeo Stereo Tool 9.83 for 64 bit and presets dap hd new full sir

Leave a Reply