Ultra smooth. Ultra sharp. Ultra steady. Topaz Video is a professional, AI-powered video enhancement software that lets you denoise low-light footage, recover and upscale old archival videos to 4K, restore focus, and adjust frame rate by creating new frames out of thin air. Available on Mac and Windows.
Trusted by major film studios and creative pros everywhere.
Denoise with cinema-level detail. Create new frames with frame interpolation. And stabilize the camera after the moment has already passed.
Filmmakers & Editors
Restore, upscale, and refine footage for professional post-production workflows.
Archivists & Historians
Preserve and modernize archival film, VHS, and historical footage with clarity.
Creators & Influencers
Enhance social media videos with sharper detail, higher resolution, and smoother motion.
Hobbyists & Enthusiasts
Improve old family videos and personal projects to look like they were shot today.
System Requirements:
Windows Operating System: 11 (most updated version recommended)
CPU: Intel OR AMD with AVX2 instructions
System Memory (RAM): 16 GB (32 GB or more recommended)
Graphics Card (NVIDIA): NVIDIA GTX 900 series or higher, 6GB VRAM
Graphics Card (AMD): AMD Radeon 500 series or higher, 6GB VRAM
Graphics Card (Intel): Intel ARC A750
CPU Release Year: 2016 or newer
Improvements and Fixes
Features
- SDR-HDR: Hyperion 2.5
- Topaz Panel Update
- Model Manager Update
- First Start Neuroserver Model Manager
- Stabilization Preview: Disable Option
- Extra Metadata: Settings and Export
- Add Watermark to Exports
- Hardware Decode Options
Bug fixes:
- Encoding/decoding errors
- Thumbnail artifacts with .mov sources
- LUT issue
- Starlight Precise 2.6 processing speed fix
Thanks to Team VR, AlekseyPopovv, 423down and rbc release
Registered Members only
69 thoughts on “Topaz Video Pro 1.7.1”
Thanks! it works fine but i cannot use starlight mini, it gives an error, is a crack limitation? it worked fine in video ai.
Hi, how did you make starlight mini work in Video AI?
Um, it worked out of the box for me on a rtx 4060
Replace “runner.exe” in ProgramData/Topaz Labs LLC/Topaz Video/Models
By the one in this archive : https://limewire.com/d/O5WVY#PPljBEttfZ
And there you go, it works
This solution is not permanent, it basically ask to run system check and re-download the starlight mini on every start-up.
It’s very permanent for me. I only had to download Starlight mini once
is runner.exe still available??
Releases
Topaz Video 1.0.1 – Patch
Topaz Video 1.0.0 (New Studio Release)
1.2.2 ends in windows installer error after setup extraction
yes it fails
where is 1.2.1?
1st download is the release version…
Thanx ^_^
But … any workaround about the “Win Installer Error” for 1.2.2 version ?
team vr release not mine…
I’ve already downloaded the Starlight Mini files. Where do I put them? Thanks
Check the VR NFO ^_^
I don’t understand. I’ve already downloaded the Starlight Mini files from the text file. Now I need the path to put the downloaded files so they work on Topaz. Do you know what the path is?
did you figure this out? there are no instructions on how to do anything properly
Topaz video 1.3.0 pls.
Is there a crack for 1.3? Installs but won’t let me do anything.
extract with winrar… hook is inside. password CyberMania
Does the version 1.2.2 have the new Starlight models? When will the version 1.3.0 be available from Team V.R?
Any info?
Thanks for the service but I have to say the instructions are horrible. It’s not clear what I’m supposed to do to install the latest possible version with the starlight model. Can someone guide me briefly?
version 1.3.0 and 1.3.1 doesn’t work. It tells me to log in with my email to activate
Starlight not worked….
second that…
1.3.1 works for me 1.3.2 rc and 1.4.0 both cause errors running starlight models same; using medicine in 1.4.0 also causes to re-download starlight mini; there are new starlight models in 1.4.0, so im assuming the medicine needs updating.
Does (Cracked Installer) x64 1.4.1 RC work with Starlight models for anyone? I keep getting Errors :/
1.4.1 and 1.4.0 Starlight error ((
on 1.4.0 and 1.4.1 all starlight models throw an “error” when trying to render.
Same. 1.3.1 works, everything after that doesn’t.
Here is V1.3.1:
https://br0wsers.com/blog/detail/wO4ZNTY7c7i2DB0RMCQJsE48o-3733-10468.html
Password: taiwebs.com
Same here
I also confirm: all starlight models throw an “error” when trying to render. Please update it if possible. Thank you!!
The neuroserver also needs to be cracked, and the starlight models will not run on versions after 1.3.1 without the neuroserver installed. Hopefully someone will be able to crack it soon so we can run the starlight models again with 1.4.0 and later.
Any updates about the Starlight Models error? Also version 1.5.0 is out !!!!!
Version 1.5.0 reports a trojan in my Windows defender
Where do I save the Neuroserver files? There are two RAR files. Could someone tell me the directory or path where I can download them?
The installer installs everything automatically, you don’t need to do it manually.
no matter what i do with starlite it doesnt work. I have Downloaded all the packages which are quite sizable I have no idea where to put them because your instructions don’t say where to put the downloadable packages also please go through the process step by step in the instructions A little bit more detail than what you already have. Normally I’m not this slow on technology but I really really want my topaz to work a lot better than what it is
The installer installs everything automatically, you don’t need to do it manually.
Has anyone got starlight models working? (1.6.0)?
Yes, all models are working.
Thanks for the update!
starlight models are in fact NOT working
Hello, this is my first time visiting. You will need help with each file description and installation procedure.
Do I just need to install the 1.6.1 release version or the 1.6.2 RC version?
I don’t know what Afterpatch Starlight Medicine and Chatrid Topaz Patcher are. Please explain it to me.
just install the release version and forget all… v.r rc is just extra for those who want try new release
DOES NOT WORK
does not work even with afterpatch
it was tested before release… it work
As of the 13/8/25 downloaded Ver 1.7 i get a warning [no licenses are currently available] unable to do anything and have tried a fresh clean install as well
Same exact issue.
Edit: antivirus removed file: C:\Program Files\Topaz Labs LLC\Topaz Video\dxgi.dll. Restored it and now this error is gone.
Starlight precise not working though. Getting an error..
ok so I’ve disabled my antivirus before doing a fresh reinstall (which is skech AF as my antivirus goes nuts every time I visit this site) it does fix the no license issue however if i try and use starlight mini evey time it fails after starting it.
think i might just wait till 7.1 or something as it seems as it stands 1.7 has a bit 2 many bugs
Yeah same issue. Had I known I would have just stuck with 6.1. Hopefully this gets fixed soon.
Edit : Downloaded this version https://filecr.com/windows/topaz-video/
manually added 2 .dlls and deleting the .lic files worked for me. No error using starlight 2.6!
Thank you for this! This worked for me as well with no issues and no antivirus popups, unlike the version on this page.
ive got the floating license but still no mini or precise is working 🙁
Everything is working fine except Starlight. It was running on my 8 GB GPU before this release. It was supposed to only work with 10 GB, but it worked for me before, so I don’t know if they changed that or if it’s a bug.
dont think so, i have a 5080 and was working before but now it pretty useless
rip then
error with starlight precise
some av catch the version.dll files maybe… install your own.. download hook and read the guide
1.7.0 – EVERY model runs into an error within 3 seconds………
All Models have been downloaded, and Cloud Processing has been disabled.
1.7.0 doesnt work at all all the models gives an error
The Topaz Video 1.7.0 repack installer works perfectly!
There’s probably an old license file still present. Delete “%ProgramData%\Topaz Labs LLC\Topaz Video\models\*.lic” and copy the newly installed “topaz.lic” file (from your specified Models folder) to the same location after installation.
That’s a little confusing. What do you mean copy the newly installed topaz.lic from the models folder to the specified models folder? That’s literally the same directory.
Starlight & Starlight Precise 2.6 do NOT work. Unable to click “Neuroserver models” to download them.
EVERYTHING ELSE WORKS.
I downloaded 1.7.0 and replaced the DLL files, but after that, it asks me to connect to email, and then it’s blocked.
I don’t have any. lic file in any folder…
Can someone please maybe upload a license file so I can use it?
1.7.1 wants me to log in with email or Gmail… wth!?
No one is talking about Hyperion 2.5; has anyone tried it? It’s not working for me—it throws a license error.
Starlight does not work in 1.7.1
Thread: 3624 Warning qrc:/videomanager/ExportsPage.qml:122: TypeError: Cannot read property ‘uid’ of undefined
Thread: 3624 Warning qrc:/videomanager/ExportsPage.qml:562: TypeError: Cannot read property ‘uid’ of undefined
Thread: 3624 Info FF Process Output: 93 TOPAZ_RUNNER_DIR: C:\Program Files\Topaz Labs LLC\Topaz Video\neuroserver
TOPAZ_MODEL_STORE: C:\ProgramData\Topaz Labs LLC\Topaz Video\models\/models
USE_DML: False
Thread: 3624 Info FF Process Output: 93 INFO:local_model_service:Using device: 0
Thread: 3624 Info FF Process Output: 93 ERROR:topserving.fy8kzpmd8436:License checkout failed
ERROR:local_model_service:No valid license or auth found. Please ensure you have a valid license or auth to run the model.
Impossivel download the models =/
In Topaz Video Pro 1.7.1, the Neuroserver models no longer work with the current patch.
In Topaz Video Pro 1.7.0, you can activate them after the installer using this “Medicine”: https://www.mediafire.com/file/qahyqfbn2u9c1ho/topazlabs.products.proxydll.1.0.0.4.7z/file Pass CyberMania
After deleting the .lic file → model directory, you must copy the modified topaz.lic file from the installation folder back to C:\\ProgramData\\Topaz Labs LLC\\Topaz Video\\models (…\\Topaz Photo\\…). Afterward, you will be registered again, and the models will work, e.g., Starlight, Wonder 3.5, etc.
This applies to both Topaz Video and Topaz Photo 1.7.0.
P.S. Perhaps Cyberloner could include these installation steps and the two files directly in his installer as the final installation step, so that it doesn’t have to be done manually.